MICRO DEPTH SOUNDER (D11S) 2008 RXP SeaDoo

Customer Notes: After confirming lack of a factory transducer position on RXP I sanded an area forward port side of the jet tunnel & resin glued a plastic "camera" mould. With jetski horizontal (length/breadth) using spirit level, the mould was filled with resin to produce true flat area (facing down to seabed). Then glued transducer onto flat resin area. Plastic mould didnt stick well so simply glued resin assembly to hull. Cable routed on starboard side away from exhaust to DSM. Works a great at any speed.